MAKEXCAR KNOWLEDGE
Automotive Parts Glossary
Clear terminology for confident parts sourcing. Explore component names, common abbreviations and practical definitions across seven vehicle-system categories.
Find a term
Browse all 161 terms
Glossary terms
Cooling & A/C
A/C Accumulator
Refrigerant moisture-control component
A filtering and storage component on the low-pressure side of an air-conditioning circuit that uses an orifice tube. It captures moisture and debris and prevents liquid refrigerant from entering the compressor.
Cooling & A/C
A/C Compressor
Air-conditioning compressor
The component that compresses and circulates refrigerant through the vehicle air-conditioning circuit.
Cooling & A/C
A/C Compressor Oil
Refrigeration compressor lubricant
Oil used within the air-conditioning circuit to lubricate compressor parts, help remove heat and provide sealing. The required oil specification depends on the compressor and refrigerant system.
Cooling & A/C
A/C Pressure Sensor
Refrigerant pressure transducer
A sensor that measures refrigerant pressure and sends a variable electrical or digital signal to the control system. Unlike a simple switch, it can communicate changing pressure values.
Cooling & A/C
A/C Pressure Switch
Refrigerant pressure protection switch
A device that detects refrigerant pressure and provides an on/off signal. It helps the air-conditioning control system respond to excessively low or high pressures and protect circuit components.
Steering & Brakes
ABS
Anti-lock Braking System
A control system that modulates braking pressure to help prevent wheel lock during braking.
Filtration
Activated Carbon Cabin Filter
Cabin filter with adsorbent carbon
A cabin-air filter containing activated carbon in addition to particle-filtering layers. The carbon adsorbs certain gases and odours; performance depends on the filter design and operating conditions.
Filtration
Air Filter
Engine intake filtration
A replaceable element that captures airborne particles before they enter the engine intake.
Suspension & Chassis
Air Spring
Pneumatic suspension spring
A suspension spring that supports vehicle weight using pressurized air inside a flexible sleeve. Changing air pressure allows the system to adjust its ride height and response.
Suspension & Chassis
Air Strut
Combined air spring and structural strut
A suspension assembly that integrates an air spring with a structural strut. It provides load support and damping while helping control ride height and wheel alignment.
Suspension & Chassis
Air Suspension Compressor
Pneumatic suspension air supply
An electrically controlled compressor that generates the pressurized air used by air springs. It replenishes system pressure so the suspension can maintain the required ride height.
Engine & Ignition
Alternator
Vehicle electrical generator
An engine-driven generator that supplies electrical power and charges the battery while the engine runs.
Filtration
Anti-drainback Valve
Oil-filter valve
A valve used in some oil filters to help retain oil in the filter when the engine is stopped.
Filtration
Axial Seal
End-face air-filter sealing arrangement
An air-filter seal formed by compressing a gasket between the filter end face and the air-cleaner housing. It helps prevent unfiltered air from passing around the element.
Suspension & Chassis
Ball Joint
Suspension pivot joint
A spherical joint that permits angular movement between connected suspension or steering components.
Wiper & Washer
Beam Wiper Blade
Frameless-style wiper blade
A wiper blade that uses an integrated spring structure to distribute pressure along the wiping edge.
Drivetrain & Wheel End
Bearing Preload
Intentional negative bearing clearance
An internal bearing load applied before external working loads act. In suitable driveline applications, controlled preload increases stiffness and helps maintain precise shaft positioning.
Engine & Ignition
Belt Tensioner
Accessory belt tension control assembly
An assembly that maintains the working tension of an accessory drive belt. Automatic designs adjust tension as conditions change and damp loading fluctuations during engine acceleration and deceleration.
Steering & Brakes
Bleed Screw
Hydraulic brake air-release fitting
A small closable fitting on a brake caliper or wheel cylinder that provides an outlet for trapped air and fluid during the specified bleeding process.
Cooling & A/C
Blower Resistor
Cabin blower speed-control component
An electrical component used in some HVAC systems to control cabin blower fan speed. It regulates the supplied power so the ventilation system can provide different airflow settings.
Steering & Brakes
Brake Booster
Brake-pedal force assistance
A device that reduces the pedal effort needed to produce braking pressure. Vacuum-assisted designs use a pressure difference across a diaphragm; other designs provide electromechanical assistance.
Steering & Brakes
Brake Caliper
Disc-brake actuator
The assembly that applies force to brake pads so they clamp against the brake disc.
Steering & Brakes
Brake Disc
Disc-brake rotor
A rotating braking surface attached to the wheel-side assembly. Brake pads press against it to generate braking force.
Steering & Brakes
Brake Drum
Drum-brake rotating friction surface
A drum-shaped component that rotates with the wheel. Brake shoes press against its internal friction surface to convert rotational energy into heat and reduce wheel speed.
Steering & Brakes
Brake Hose
Flexible hydraulic brake line
A flexible line that carries brake fluid while accommodating movement between connected components.
Steering & Brakes
Brake Line
Rigid hydraulic brake pipe
A rigid pipe that carries brake fluid between hydraulic components, such as the master cylinder and wheel brakes. Flexible brake hoses accommodate movement where rigid piping cannot.
Steering & Brakes
Brake Pad
Disc-brake friction component
A backing plate and friction material assembly that presses against a brake disc during braking.
Steering & Brakes
Brake Pad Wear Sensor
Pad replacement warning sensor
An electrical sensing component that signals when brake-pad wear reaches a specified level. Sensor construction and warning behaviour vary with the vehicle and brake-pad application.
Steering & Brakes
Brake Shoe
Drum-brake friction component
A curved support carrying friction material for a drum brake. Hydraulic or mechanical actuation pushes the shoe against the drum’s inner surface to produce braking force.
Suspension & Chassis
Bushing
Elastic suspension joint
A resilient insert, often made from rubber or bonded rubber and metal, that controls movement and isolates vibration at a mounting point.
Filtration
Bypass Valve
Oil-filter bypass valve
A valve that allows oil to pass around the filter element when the pressure difference across it exceeds a specified value.
Filtration
Cabin Air Filter
Passenger-compartment air filtration
A filter that captures particles from air entering the passenger compartment through the ventilation system.
Cooling & A/C
Cabin Blower Fan
HVAC blower motor and impeller
An electrically driven fan that moves air through the vehicle heating and air-conditioning unit into the passenger compartment. Airflow passes through the evaporator or heater core as required.
Steering & Brakes
Caliper Dust Boot
Brake-piston contamination cover
A flexible protective cover around the brake-caliper piston area. It helps keep dirt and moisture away from the piston and cylinder without replacing the internal hydraulic seal.
Steering & Brakes
Caliper Guide Pin
Floating-caliper sliding guide
A pin that guides movement between a floating brake-caliper body and its support. The sliding arrangement allows the caliper to apply the opposing pad against the disc.
Steering & Brakes
Caliper Piston
Hydraulic brake-pad actuator
A piston inside a brake caliper that converts brake-fluid pressure into force on the pad. Caliper designs differ in piston quantity, arrangement and dimensions.
Steering & Brakes
Caliper Piston Seal
Internal brake-caliper hydraulic seal
A seal around the caliper piston that retains hydraulic fluid and supports controlled piston movement. Its material and dimensions must match the caliper and specified brake fluid.
Suspension & Chassis
Camber
Wheel inclination angle
The inward or outward tilt of a road wheel relative to vertical when viewed from the front. This alignment angle influences how the tire contacts the road.
Engine & Ignition
Camshaft Position Sensor
CMP sensor
A sensor that reports camshaft position to the engine control unit. Together with crankshaft information, its signal helps identify cylinder timing and coordinate fuel injection and ignition.
Filtration
Cartridge Filter
Replaceable filter element
A filter design in which the filtering element is replaced inside a retained housing. The element, seals and housing arrangement must match the specified application.
Suspension & Chassis
Caster
Steering-axis inclination angle
The forward or rearward tilt of the steering axis when viewed from the side of the vehicle. It is an alignment angle associated with straight-line steering behavior.
Filtration
Cellulose Filter Media
Paper-based filtering material
Filter material made primarily from natural cellulose fibres. Fibre structure, treatment and element design influence particle capture, contaminant capacity and resistance to the flow of air or liquid.
Drivetrain & Wheel End
Clutch Disc
Clutch friction disc
A friction disc that transfers torque between the engine and transmission when the clutch is engaged.
Drivetrain & Wheel End
Clutch Master Cylinder
Hydraulic clutch pressure source
A cylinder that converts clutch-pedal movement into hydraulic pressure. The pressure travels through a hydraulic line to the slave cylinder, which actuates the clutch release system.
Drivetrain & Wheel End
Clutch Pressure Plate
Clutch clamping assembly
The assembly that presses a clutch disc against the flywheel to engage the clutch. In a diaphragm-spring design, the release bearing acts on spring fingers to disengage it.
Drivetrain & Wheel End
Clutch Release Bearing
Throw-out bearing
A bearing in the clutch actuation system that transfers release force to the rotating clutch mechanism. It allows the clutch to disengage while accommodating relative rotational movement.
Suspension & Chassis
Coil Spring
Suspension spring
A helical spring that supports vehicle load and allows the suspension to compress and extend.
Engine & Ignition
Common Rail Pump
High-pressure diesel fuel pump
A pump used in a common rail diesel fuel system to create high-pressure fuel for the injectors. Its delivery capacity and pressure control are matched to the engine application.
Drivetrain & Wheel End
Concentric Slave Cylinder
CSC — integrated hydraulic clutch release unit
A hydraulic clutch actuator that combines the slave cylinder and release bearing in one unit. It mounts at the transmission and replaces a separate release-fork arrangement.
Cooling & A/C
Condenser
Air-conditioning heat exchanger
A heat exchanger that rejects heat from refrigerant and allows it to condense from gas to liquid.
Suspension & Chassis
Control Arm
Suspension locating link
A link between the chassis and wheel assembly that guides suspension movement and helps maintain wheel position.
Wiper & Washer
Conventional Wiper Blade
Frame-style wiper blade
A wiper blade that uses an articulated frame to distribute pressure to the rubber wiping element.
Cooling & A/C
Coolant Expansion Tank
Cooling-system reservoir
A reservoir that accommodates changes in coolant volume; its pressure function depends on the system design.
Cooling & A/C
Coolant Hose
Cooling-system flexible fluid line
A flexible line that carries coolant between cooling-system components. Molded versions follow a specific routing and may serve radiator, bypass or heater connections, depending on the vehicle.
Cooling & A/C
Cooling Fan
Radiator airflow fan
A fan that forces air through the radiator to help remove engine heat, especially when natural airflow is limited. Its operating speed and control method depend on the cooling-system design.
Engine & Ignition
Crankshaft Position Sensor
Engine position and speed input
A sensor that detects crankshaft rotation so the engine control unit can determine engine position and speed.
Drivetrain & Wheel End
CV Axle
Constant-Velocity axle assembly
A shaft assembly with constant-velocity joints that transmits torque to a driven wheel while accommodating movement.
Drivetrain & Wheel End
CV Boot
Constant-velocity joint sealing cover
A flexible sealing cover fitted around a constant-velocity joint. It encloses the lubricated joint and helps maintain the sealing protection needed for reliable driveshaft operation.
Drivetrain & Wheel End
CV Joint
Constant-Velocity joint
A joint designed to transmit rotary motion through changing angles while maintaining a consistent output speed.
Suspension & Chassis
Damper
Suspension motion control
A component that resists suspension movement to control oscillation. Shock absorbers and struts include damping functions.
Drivetrain & Wheel End
Differential
Drivetrain speed-difference mechanism
A gear mechanism that allows connected drive wheels to rotate at different speeds while transmitting torque.
Filtration
Differential Pressure
Pressure drop across a filter
The difference between pressure upstream and downstream of a filter, often written as ΔP. It changes with fluid viscosity, flow rate, media design and accumulated contamination.
Drivetrain & Wheel End
Driveshaft
Drivetrain torque-transmission shaft
A rotating shaft used to transmit torque between drivetrain components.
Drivetrain & Wheel End
Dual Mass Flywheel
DMF — torsional vibration isolation flywheel
A flywheel assembly designed to isolate engine torsional vibrations from the transmission. Its vibration-damping function helps reduce driveline noise and improve starting and gear-shifting comfort.
Wiper & Washer
Dual-Outlet Washer Pump
Reversible front-and-rear washer pump
A pump that supplies both the front windscreen and rear window through separate outlets. In reversible designs, changing motor rotation determines which washer circuit receives fluid.
Filtration
Dust Holding Capacity
Air-filter contaminant capacity
The amount of test dust an air filter retains before reaching a specified terminal restriction. Compare values only with the stated test conditions and restriction limit.
Engine & Ignition
EGR Valve
Exhaust Gas Recirculation valve
A valve that meters exhaust gas back into the engine intake. Controlled recirculation changes the combustion conditions and helps reduce nitrogen oxide emissions, according to engine operating requirements.
Engine & Ignition
EGT Sensor
Exhaust Gas Temperature sensor
A sensor that reports exhaust gas temperature to the engine control unit. Its signal helps protect temperature-sensitive components and supports temperature control during diesel particulate filter regeneration.
Cooling & A/C
Engine Coolant
Cooling-system heat-transfer fluid
A fluid that circulates through engine cooling passages, absorbs heat and carries it to the radiator. Its formulation and additives are selected for the cooling-system materials and operating requirements.
Suspension & Chassis
Engine Mount
Powertrain support and vibration isolator
A mounting component that supports the engine and connects it to the vehicle body or chassis. It limits engine movement and reduces vibration and structure-borne noise transfer.
Steering & Brakes
EPB
Electric Parking Brake
A parking-brake system that uses electric actuation instead of relying solely on a manual lever and cable. Motor-driven caliper mechanisms are one common implementation.
Steering & Brakes
EPS
Electric Power Steering
A steering-assistance system using an electric motor. A controller determines assistance from steering inputs and other vehicle signals, then commands the motor to support steering effort.
Cooling & A/C
Evaporator
Cabin air-conditioning heat exchanger
A heat exchanger in which refrigerant absorbs heat from air passing into the cabin.
Cooling & A/C
Expansion Valve
Thermostatic Expansion Valve (TXV)
A refrigerant metering device that regulates flow into an air-conditioning evaporator. A thermostatic design adjusts the supplied quantity using conditions at the evaporator outlet to support efficient evaporation.
Filtration
Filter Media
Filtration material
The porous material inside a filter that captures particles while allowing the working fluid or air to pass through.
Filtration
Filtration Efficiency
Particle-capture performance
The proportion of introduced contamination captured by a filter under specified test conditions. Efficiency should be read together with particle size and test method, rather than as an isolated percentage.
Steering & Brakes
Fixed Caliper
Rigid-mounted disc-brake caliper
A brake caliper whose body is rigidly mounted and uses pistons on opposing sides of the disc. The body does not slide to apply the opposite pad.
Drivetrain & Wheel End
Fixed CV Joint
Fixed constant-velocity joint
A constant-velocity joint generally fitted at the wheel end of a sideshaft. It transfers torque through the articulation angles required for steering and suspension movement.
Steering & Brakes
Floating Caliper
Sliding-body disc-brake caliper
A brake caliper with pistons on one side of the disc. The body slides on guides so its reaction force applies the pad on the opposite side.
Filtration
Fuel Filter
Fuel-system filtration
A filter that helps remove contamination from fuel before it reaches downstream fuel-system components.
Engine & Ignition
Fuel Injector
Fuel metering and atomizing component
A controlled component that sprays a measured quantity of fuel into the intake passage or combustion chamber. Injection timing, pressure and spray pattern depend on the engine fuel-system design.
Engine & Ignition
Fuel Pump
Fuel delivery pump
A pump that delivers fuel from the tank toward the engine at the flow and pressure required by the system. Many passenger vehicles use an electrically driven in-tank pump.
Filtration
Fuel-Water Separator
Water-removal fuel filter
A fuel-system filter designed to separate water from fuel while also managing particulate contamination. Some assemblies include a collection bowl, water sensor or drain arrangement.
Engine & Ignition
GDI
Gasoline Direct Injection
A gasoline fuel-system design that injects fuel directly into the engine cylinders rather than only into the intake manifold. It permits precise control of fuel delivery within the combustion chamber.
Engine & Ignition
Glow Plug
Diesel combustion heating element
An electrically heated component used in diesel engines to raise combustion chamber temperature. It helps support combustion when conditions are cold and may remain active beyond initial engine starting.
Wiper & Washer
Headlamp Washer Pump
Headlamp-cleaning fluid pump
A pump that delivers cleaning fluid to the headlamp washing system. Jet-type headlamp cleaners generally require greater pump power and pressure than windscreen washer systems.
Cooling & A/C
Heater Core
Cabin heating heat exchanger
A heat exchanger that uses engine coolant to warm air supplied to the passenger compartment.
Drivetrain & Wheel End
Hub Bearing
Wheel-end bearing
A bearing or bearing unit that supports wheel rotation at the hub.
Cooling & A/C
HVAC Actuator
Heating, Ventilation and Air Conditioning actuator
A component that positions airflow-control mechanisms inside the HVAC unit. It helps direct air toward selected outlets or regulate the mixture of heated and cooled air entering the cabin.
Wiper & Washer
Hybrid Wiper Blade
Covered frame-style wiper blade
A blade that combines a conventional supporting structure with a low-profile aerodynamic cover. This design differs from a beam blade, which distributes wiping pressure through an integrated spring structure.
Suspension & Chassis
Hydraulic Bushing
Fluid-damped suspension bushing
A suspension bushing that combines resilient material with hydraulic damping fluid. The fluid helps absorb vibration transmitted through the suspension, beyond the damping provided by rubber alone.
Suspension & Chassis
Hydraulic Engine Mount
Hydromount
An engine mount that adds fluid damping to a resilient mounting element. Resistance to fluid movement helps soften engine-related jolts and vibrations over particular operating frequencies.
Engine & Ignition
Idler Pulley
Belt routing pulley
A freely rotating pulley that guides a drive belt along its intended route. Its diameter, contact surface and bearing arrangement are selected for the particular belt-drive layout.
Engine & Ignition
Ignition Coil
Spark-ignition voltage transformer
A component that produces the high voltage required to generate a spark at the spark plug.
Engine & Ignition
Ignition Lead
High-voltage ignition cable
An insulated cable and connector assembly that carries high voltage from an ignition coil to a spark plug. It provides an electrical connection in ignition systems using separate leads.
Engine & Ignition
Intake Air Temperature Sensor
IAT sensor
A sensor that measures the temperature of air entering the engine. The engine control unit uses this information to account for air density when controlling fuel injection.
Wiper & Washer
Integrated Washer Wiper Blade
Wiper blade with fluid-distribution channels
A wiper blade that distributes washer fluid through channels and outlets along its length. The washing and wiping functions are combined rather than relying solely on separate body-mounted spray nozzles.
Cooling & A/C
Intercooler
Charge-air cooler
A heat exchanger that cools air compressed by a turbocharger or supercharger before it enters the engine. Air-to-air and liquid-cooled arrangements are used to reduce charge-air temperature.
Engine & Ignition
MAP Sensor
Manifold Absolute Pressure sensor
A sensor that measures pressure inside the intake manifold. The engine control unit uses this pressure signal to estimate intake air quantity and manage the air-fuel mixture.
Engine & Ignition
Mass Air Flow Sensor
MAF sensor
An intake sensor that measures the air entering the engine and sends a signal to the engine control unit. This information helps determine the appropriate fuel quantity for combustion.
Steering & Brakes
Master Cylinder
Hydraulic brake-pressure source
A component that converts brake-pedal input into hydraulic pressure for the braking system.
Filtration
Micron Rating
Particle-size reference
A filter performance reference expressed in micrometres. Compare it together with the stated efficiency and test method.
Filtration
Oil Filter
Engine lubrication filtration
A filter that helps capture particles from engine oil as it circulates through the lubrication system.
Cooling & A/C
Orifice Tube
Fixed refrigerant metering device
A fixed restriction used in certain vehicle air-conditioning circuits. It reduces refrigerant pressure before the evaporator, allowing the refrigerant to absorb heat as it evaporates.
Engine & Ignition
Oxygen Sensor
Exhaust oxygen sensor
A sensor that measures oxygen-related conditions in the exhaust and provides feedback for engine and emissions control.
Steering & Brakes
Parking Brake Cable
Mechanical parking-brake linkage
A cable that transmits mechanical movement from a parking-brake control to the wheel-brake mechanism. Cable routing, end fittings and adjustment arrangements depend on the vehicle.
Engine & Ignition
PCV Valve
Positive Crankcase Ventilation valve
A valve used in a crankcase ventilation system to regulate the flow of crankcase gases into the intake.
Drivetrain & Wheel End
Pilot Bearing
Transmission input-shaft guide bearing
A bearing that guides and supports the transmission input shaft in applicable clutch systems. It helps maintain shaft alignment so the clutch can function correctly.
Drivetrain & Wheel End
Plunging CV Joint
Axially movable constant-velocity joint
A constant-velocity joint that permits axial movement so the effective sideshaft length can change with suspension travel. It is commonly fitted at the gearbox or differential end.
Filtration
Pre-Cleaner
Intake-air preliminary separator
A device ahead of the main engine air filter that separates a portion of incoming dust or debris. Its design and airflow capacity must suit the intake system.
Steering & Brakes
Rack and Pinion
Steering gear mechanism
A gear arrangement that converts steering-wheel rotation into the linear movement used to steer the road wheels.
Filtration
Radial Seal
Air-filter outlet-tube seal
An air-filter sealing arrangement that contacts the outlet tube around its circumference. The radial contact helps prevent contaminated intake air from bypassing the filter element.
Cooling & A/C
Radiator
Engine cooling heat exchanger
A heat exchanger that releases heat from engine coolant to the surrounding air.
Cooling & A/C
Radiator Cap
Cooling-system pressure cap
A cap designed to seal the coolant filler opening and control cooling-system pressure. Its pressure rating and filler-neck dimensions must correspond to the system for which it is specified.
Wiper & Washer
Rain Sensor
Automatic-wiping precipitation sensor
An optical sensor that detects water on the windscreen through changes in reflected infrared light. It sends a signal to the wiper controller to adjust wiping frequency.
Suspension & Chassis
Rebound Bumper
Suspension extension-travel cushion
A cushioning component inside a strut that controls impact at the end of extension travel. It helps reduce top-out noise and protects the strut’s internal parts.
Cooling & A/C
Receiver Drier
Refrigerant storage and moisture-control component
A component used in some A/C systems to hold liquid refrigerant and help remove moisture and contamination.
Filtration
Restriction Indicator
Air-filter airflow-resistance gauge
A device that indicates intake restriction so air-filter condition can be assessed against the engine manufacturer’s limit. It measures airflow resistance rather than judging the element by appearance.
Suspension & Chassis
Ride Height Sensor
Suspension position sensor
A sensor that measures the relative position of the vehicle body and suspension. Its signal helps an air-suspension control unit determine when height adjustments are required.
Filtration
Safety Filter
Secondary engine air-filter element
An inner air-filter element that helps protect the clean-air outlet during primary-filter servicing or if the primary element is damaged. It does not replace the main filter.
Engine & Ignition
Serpentine Belt
Multi-rib accessory drive belt
A flexible, ribbed belt used in an engine accessory drive. It transmits power around multiple pulleys to components such as the alternator and air-conditioning compressor, depending on vehicle layout.
Suspension & Chassis
Shock Absorber
Suspension damper
A damper that helps control spring and suspension movement as the vehicle travels over road surfaces.
Engine & Ignition
Spark Plug
Spark-ignition component
A threaded component that creates an electrical spark in the combustion chamber of a spark-ignition engine.
Filtration
Spin-on Filter
Threaded filter-canister assembly
A filter supplied as a canister assembly that screws onto a matching mounting head. The canister and its internal filtering element are replaced together.
Suspension & Chassis
Stabilizer Bar
Anti-roll bar or sway bar
A suspension component that helps resist vehicle body roll during cornering and over uneven road surfaces. It works with the suspension to improve stability and handling.
Suspension & Chassis
Stabilizer Link
Anti-roll-bar link
A connecting link that transfers movement between the stabilizer bar and the suspension.
Engine & Ignition
Starter Motor
Engine cranking motor
An electric motor that turns the engine during starting.
Steering & Brakes
Steering Rack
Steering gear assembly
The assembly that transmits steering input to the steering linkage; designs may use hydraulic or electric assistance.
Steering & Brakes
Steering Torque Sensor
Steering-effort measurement sensor
A sensor that measures torque applied through the steering input. Electric power-steering controllers use this signal to calculate the assistance supplied by the steering motor.
Suspension & Chassis
Strut
Structural suspension assembly
A suspension member that combines a damping function with a structural role in locating the wheel assembly.
Suspension & Chassis
Strut Mount
Upper strut mounting assembly
The connection between a strut assembly and the vehicle body. Its resilient elements help isolate road noise and vibration, while applicable bearing designs allow smooth steering movement.
Suspension & Chassis
Suspension Bump Stop
Jounce bumper
A resilient cushion that limits extreme suspension compression near the end of its travel. It absorbs bottoming forces and helps protect the suspension and strut components.
Suspension & Chassis
Suspension Dust Boot
Shock or strut protective cover
A protective cover around an exposed shock or strut piston rod. It limits contact with moisture and road debris, helping protect the rod surface and seal.
Filtration
Synthetic Filter Media
Manufactured-fibre filtering material
Filter material made from manufactured fibres with controlled size and structure. Media design influences particle capture, contaminant retention and flow resistance; synthetic construction alone does not define performance.
Drivetrain & Wheel End
Tapered Roller Bearing
Combined radial and axial load bearing
A rolling bearing designed to carry radial and axial loads together. Wheel ends may use paired inner and outer tapered bearings to provide rigid guidance of the rotating assembly.
Cooling & A/C
Thermostat
Engine coolant flow regulator
A temperature-responsive valve that regulates coolant flow through the cooling system.
Steering & Brakes
Tie Rod End
Steering linkage joint
A pivot joint at the end of a tie rod that connects steering linkage components while allowing movement.
Engine & Ignition
Timing Belt
Engine timing drive belt
A toothed belt used on some engines to synchronize crankshaft and camshaft rotation.
Suspension & Chassis
Toe
Wheel direction alignment angle
The inward or outward direction of the road wheels when viewed from above. An incorrect toe setting can increase tire wear as the tires roll along the road.
Drivetrain & Wheel End
Torque Converter
Hydrodynamic automatic-transmission coupling
A fluid-based coupling used in many automatic transmissions to transfer power between the engine and transmission. It supports vehicle launch and takes the place of a conventional clutch.
Drivetrain & Wheel End
Transmission Mount
Transmission support and vibration isolator
A mounting component that connects the transmission to the vehicle body. It supports the unit while damping the transfer of vibration and structure-borne noise into the body.
Drivetrain & Wheel End
Tripod CV Joint
Tripod plunging constant-velocity joint
A plunging constant-velocity joint design commonly used at the gearbox end of a sideshaft. It accommodates angular movement and axial travel while transmitting torque through the driveline.
Wiper & Washer
U-Hook Connection
Hook-type wiper arm fitting
A wiper attachment in which the curved, hook-shaped end of the arm engages a matching blade connector. Common versions include 9 × 3 mm and 9 × 4 mm hooks.
Drivetrain & Wheel End
Universal Joint
Driveshaft articulation joint
A joint that allows a shaft to transmit rotary motion between components whose axes meet at an angle.
Steering & Brakes
Vented Brake Disc
Brake rotor with cooling passages
A brake disc with an internal ventilation space between its friction surfaces. Vanes or pillars support the faces and allow airflow through the disc to help dissipate heat.
Wiper & Washer
Washer Check Valve
Washer-fluid non-return valve
A one-way valve in the washer-fluid circuit that helps prevent fluid from draining back when the pump stops. Some dual-outlet pumps incorporate this valve to keep the rear-window supply line filled.
Wiper & Washer
Washer Nozzle
Washer-fluid spray outlet
An outlet that directs washer fluid onto the glass surface.
Wiper & Washer
Washer Pump
Washer-fluid delivery pump
An electric pump that moves washer fluid from the reservoir to the spray nozzles.
Wiper & Washer
Washer Reservoir
Washer-fluid storage tank
The container that holds fluid for the vehicle glass-washing system.
Cooling & A/C
Water Pump
Engine coolant circulation pump
A mechanical or electric pump that circulates coolant through the engine cooling system.
Steering & Brakes
Wheel Cylinder
Hydraulic drum-brake actuator
A hydraulic cylinder in a drum brake that converts brake-fluid pressure into mechanical force. Its pistons move the brake shoes toward the drum’s friction surface.
Drivetrain & Wheel End
Wheel Hub
Wheel mounting assembly
The wheel-side component or assembly to which the road wheel is mounted.
Drivetrain & Wheel End
Wheel Seal
Wheel-end lubricant and contamination seal
A sealing component that limits lubricant leakage at the wheel end and excludes contaminants. Its sealing lips and material are designed for the required operating conditions.
Steering & Brakes
Wheel Speed Sensor
ABS wheel-speed input
A sensor that supplies wheel-rotation information to systems such as ABS and stability control.
Wiper & Washer
Wiper Adapter
Wiper arm-to-blade connector
The fitting that secures a wiper blade to its arm. Different arm connection designs require matching adapters; a multi-connection blade may use interchangeable fittings for specified applications.
Wiper & Washer
Wiper Arm
Wiper blade support arm
The arm that connects the wiper drive to the blade and applies contact pressure to the glass.
Wiper & Washer
Wiper Linkage
Wiper drive transmission mechanism
A system of rods and levers that converts rotation from the wiper motor into the repeated sweeping movement of the wiper arms and blades across the glass.
Wiper & Washer
Wiper Motor
Wiper-system drive motor
An electric motor that drives the wiper mechanism.
Wiper & Washer
Wiper Refill
Replacement rubber wiping insert
A replaceable rubber wiping strip fitted into a compatible blade assembly. It renews the wiping element rather than the complete supporting frame or connector; profile and length must match the blade.
Wiper & Washer
Wiper Spoiler
Aerodynamic blade attachment or profile
An aerodynamic feature on a wiper blade that helps counter airflow-induced lift. It supports contact between the wiping edge and glass as vehicle speed and airflow increase.
Wiper & Washer
Wiper Spring Rail
Blade pressure-distributing spring strip
A flexible spring strip within a wiper blade that helps spread arm pressure along the wiping edge. In flat blades, the spring structure replaces the visible articulated metal frame.
No terms match your selection. Try another category, letter or search.
These definitions explain component terminology. Product availability, fitment and specifications are confirmed for each inquiry.
Have an OE number or application question?
Share your reference list and specifications. Our team can review product-line availability and fitment details.
